How to keep the same face in every AI photo

One prompt, five image models, 20 tries. Not one of the 20 faces matched our persona photo.

Head of Content · Updated November 18, 2026 · How we test
The short answer

Build a persona from your character's face and generate every photo from it, so the prompt only describes the scene. A prompt alone cannot hold a face. In our test, one prompt on five image models returned 20 photos and none showed our persona's face. Keep face words out of the prompt, fix the light and framing words, and check each batch against one master image.

Create your AI model

Build a persona from your character's face and make every photo from that persona, so the prompt only has to describe the scene. Words cannot hold a face: we sent one scene prompt to five image models, four times each, and none of the 20 photos showed our persona. If you are starting from scratch, the guide on how to create an AI influencer covers the persona step, and how many photos you need to train an AI model covers the upload side.

Why the face changes

An image model does not remember your character between runs. Each run starts from random noise and builds a face that fits your words. "Young woman, long dark hair in a braid" fits thousands of faces, so the model picks one, and next time it picks another.

Three habits make the drift worse. Rewriting the whole prompt for every photo hands the model new details to chase. Big jumps in light and camera angle change how the face reads, even when the face is the same. And small faces in wide shots carry so few pixels that the model has little to hold on to.

The fix is to give the model the face itself rather than a description of it. That is the job of a persona.

Our test

We took one photo from our homepage showcase. PixelPig made it from a persona with a trained LoRA: a young woman on Tower Bridge at night, hand on the blue railing. An AI vision model then wrote a prompt describing the scene: the bridge, the railing, the white top, the navy plaid skirt, the pearl necklace, the braid, the waist-up phone framing. It left out every face word, because the test asks whether a prompt can carry a face.

We ran that prompt on Nano Banana Pro, GPT Image 2, Seedream 4.5, Wan 2.7 Pro and FLUX.1 dev, four times each, with no reference image and no persona. The grid shows all 20 images. We did not pick or edit any of them.

PixelPig: Trained persona (LoRA), from our showcase
Our photo
PixelPig

Trained persona (LoRA), from our showcase

The prompt every model got

Night photo of a young woman standing on Tower Bridge in London, one hand resting on the blue painted railing, body turned slightly toward the camera, looking off to the side. Long dark hair in a loose braid over one shoulder, fitted white short-sleeve top, navy plaid pleated skirt, pearl necklace and drop earrings. The lit stone tower and car headlights behind her, city lights on the river. Smartphone photo, natural colours, waist-up framing.

An AI vision model wrote this prompt from our photo. Face words are left out, because a prompt cannot carry a face.

Nano Banana Pro (Google)
Same prompt, no reference image, no persona
Nano Banana Pro (Google), result 1 of 4Nano Banana Pro (Google), result 2 of 4Nano Banana Pro (Google), result 3 of 4Nano Banana Pro (Google), result 4 of 4
GPT Image 2 (OpenAI)
Same prompt, no reference image, no persona
GPT Image 2 (OpenAI), result 1 of 4GPT Image 2 (OpenAI), result 2 of 4GPT Image 2 (OpenAI), result 3 of 4GPT Image 2 (OpenAI), result 4 of 4
Seedream 4.5 (ByteDance)
Same prompt, no reference image, no persona
Seedream 4.5 (ByteDance), result 1 of 4Seedream 4.5 (ByteDance), result 2 of 4Seedream 4.5 (ByteDance), result 3 of 4Seedream 4.5 (ByteDance), result 4 of 4
Wan 2.7 Pro (Alibaba)
Same prompt, no reference image, no persona
Wan 2.7 Pro (Alibaba), result 1 of 4Wan 2.7 Pro (Alibaba), result 2 of 4Wan 2.7 Pro (Alibaba), result 3 of 4Wan 2.7 Pro (Alibaba), result 4 of 4
FLUX.1 dev (Black Forest Labs)
Same prompt, no reference image, no persona
FLUX.1 dev (Black Forest Labs), result 1 of 4FLUX.1 dev (Black Forest Labs), result 2 of 4FLUX.1 dev (Black Forest Labs), result 3 of 4FLUX.1 dev (Black Forest Labs), result 4 of 4
Run on November 8, 2026. We show every image each model returned. None was picked out or edited.

We opened every image at full size. Here is what each model did.

ModelSame face as our photoSame face across its own 4What it got rightWhat went wrong
Nano Banana Pro0 of 4No, four different womenSharp bridge detail, railing, outfit, braid, phone-photo feelNothing in the scene; only the face changed
GPT Image 20 of 4No, the second and fourth look alike but are not the same womanNatural skin, warm night light, pearls and earringsNothing major in the scene
Seedream 4.50 of 4Yes, one face in all fourPearl necklace and drop earrings in all four, the largest files (3072 by 4096)Its steady face is its own, not ours
Wan 2.7 Pro0 of 4No, four different womenClean, evenly lit bridge and riverOne image puts a phone under her hand on the railing, which the prompt never asked for
FLUX.1 dev0 of 4No, four different womenStrong mood and soft background blurLooks like a camera lens, not a phone; the second image puts a clock face on the tower (the first hints at one), which the real bridge does not have

The scene came back on every model. All 20 images show Tower Bridge at night, the blue railing, a white top, a navy plaid skirt and a braid over one shoulder. The face is the one thing no model could rebuild. Our persona has fuller lips and more sharply arched brows than any of the 20.

Seedream 4.5 is the interesting case. Four tries gave what looks like the same woman, so a model can be steady without being right. It falls back to one default face when the prompt leaves the face open. That is useful if you like her, and useless if your character already has a face.

The test has limits. It compares a persona photo against plain prompts, so it shows how far words get you, not how two persona methods compare. It is one scene and one character, and we did not run the reference persona route in this test.

Fix 1: Put the face in a persona

A persona holds the face, so your prompt can shrink to the scene: "beach bar at sunset, white linen shirt, medium shot." Besides ready-made AI models, PixelPig offers two ways to build a persona from your own character.

The reference route needs one clear, front-facing face photo, with two full-body photos as optional extras. The image and video models that accept a persona then use its photos as identity references, so nothing gets trained. The AI persona page shows the flow, and if the character is you, AI photos of yourself covers the photo choice and your consent and data.

The LoRA route trains a small add-on model on 30 to 40 photos of the same person, on Pro and Scale. Our showcase photo came from this route. Use sharp photos with even light and a few angles, and leave out sunglasses, heavy filters and other people near the face.

Either way, you then pick the persona by name in the image generator and describe the scene.

Fix 2: Split the prompt into a fixed part and a scene part

Even with a persona, prompt words can pull the face around. Write every prompt in two parts:

  1. The fixed part: light style and camera distance, for example "soft natural light, medium shot, phone photo." Copy it word for word into every prompt.
  2. The scene part: place, outfit, pose and action. Change only this.

Leave age, face shape, eye colour and makeup out of the prompt. The persona already carries them, and a second description makes the model split the difference. For skin, light and small flaws, see how to make AI photos look real.

Fix 3: Check every batch against one master image

Choose one photo of your character as the master and keep it open while you review. When a face drifts, the eyes, the bridge of the nose and the jawline change first, so compare those before anything else.

If you feed reference images into a generation, use the master, never your latest output. Each copy repeats the small errors of the one before, and after ten rounds the face has moved a long way. Academy chapter 3 explains how to make a strong reference: a chest-up shot, face straight to the camera, and no phone in the frame, because a visible phone shows up again in images made from it.

Keeping the face in any pose

Poses are where people see drift most. A persona keeps the identity, but the model still has to draw the face from a new angle. Close and medium shots hold best because the face fills more of the frame. Full-body shots, sharp profile views and looking down at a phone give the model fewer pixels to work with. Make those shots, but review them against the master first, and drop the ones where the jaw or nose has changed.

Keeping the face in video

Video gives the face more chances to change, because it moves. Start each clip from a persona still, not from text. In PixelPig, Motion Control learns the face from the first frame, so a clip that opens on a clear, front-facing face starts strongest. Our AI dance video guide covers the clip choices that keep a face steady. Keep clips short and avoid fast head turns in the first second.

Common mistakes

  • Describing the face in the prompt on top of a persona.
  • Using the newest output as the next reference.
  • Rewriting the light and camera words for every photo.
  • Judging consistency from thumbnails. Drift shows at full size.
  • Retraining after one bad batch. First check the prompt for face words and the shot for a small face.

Bottom line

A prompt can describe a scene, but it cannot hold a face. In our test 20 images from five models came back with the right bridge, the right outfit and 0 matches for our persona. Put the face in a persona, keep face words out of the prompt, and check each batch against one master image. Plans and token costs are on the pricing page.

Questions

Why does my AI character look different in every photo?
A prompt describes a face in words, and thousands of faces fit the same words. The model draws a new one on each run unless it has the face itself, from a persona, a reference image or a trained LoRA.
Does using the same seed keep the same face?
Only while nothing else changes. A seed fixes the starting noise, not the identity, so a new pose, outfit or place in the prompt gives a new face. It is no way to keep a character across scenes.
Which image model keeps a face best without a persona?
In our test none kept our face. Seedream 4.5 came closest to steady, because it drew what looks like one woman in all four tries, but she was its own default face, not ours. The other four models drew four different women each.
Can I keep the same face without training a model?
Yes. A PixelPig persona can start from one clear, front-facing face photo, and the image and video models that accept a persona use its photos as identity references. Training a LoRA is the extra step on Pro and Scale.
How do I keep a consistent AI character in any pose?
Hold the face in the persona and put the pose in the scene part of the prompt. Wide shots and sharp side angles show less of the face, so check those against your master image first.
How many photos do I need for a consistent character?
For a reference persona, one clear face photo is the only required upload. A trained LoRA in PixelPig needs 30 to 40 photos of the same person.
Does the same face also work in AI video?
Start each clip from a still of the persona. PixelPig's video studio animates a persona still, and Motion Control learns the face from the first frame of the clip.

Create your AI model

Create your AI model

Start here

Read next